Previously Featured Builds

build

Viktor Halili

Viktor Halili

In the past, I used to believe that numbers and graphs could clearly present amplifier performance. I saw no good… More...
build

user27

user27

Having built an A4, I was a very happy man. I had an amplifier which produced adequate power, was not… More...

Zen Variations 4 — Nelson Pass / 2002

The Penultimate Zen is the sum of several incremental improvements to the original Zen amplifier of 1994. Eight years just flies by, doesn’t it? These improvements are contained in parts 2 through 4 of the Zen Variations, and is likely the last version of this amp, although by no means the end of the variations on the theme of single stage amplification. In part 2 we developed an improved active current source load for the single gain device which is at the heart of the amplifier. Originally designed for the Aleph amplifier series, this current source doubles the output current… More...

Matching Devices — Nelson Pass / 1993

After you acquire the devices, you will need to test them. You might consider running lots of tests on these transistors, but only one is essential: measuring gate-source voltage versus current. The greatest variations occur here, and it is necessary to do some matching to get proper performance. This test will also tell you whether or not the device is broken. The test is simple and requires a power supply, a resistor, and a DC voltmeter. Figure 12 shows the test hookup for N- and P-channel types. The supply source resistance (R1) is nominal, and is found from I =… More...

Copyright © 2016 Pass Laboratories, Inc. All rights reserved

Telephone: 530.878.5350