Previously Featured Builds

build

Foy Wilkey

Foy Wilkey

Presented is the metamorphosis of a Philips DAC960 into a BLS. The original guts of this thing was a pre… More...
build

Michael

Michael

I finished my BOZ about two months ago and am using it to drive a set of chipamp monoblocks. This… More...

B1 Buffer Preamp — Nelson Pass / 2008

Side A So here we are in the New Millennium, and thanks to Tom Holman and THX we’ve got lots of gain in our electronics. More gain than some of us need or want. At least 10 db more. Think of it this way: If you are running your volume control down around 9 o’clock, you are actually throwing away signal level so that a subsequent gain stage can make it back up. Routinely DIYers opt to make themselves a “passive preamp” - just an input selector and a volume control. What could be better? Hardly any noise or distortion… More...

A75 Part 1 — Norman Thagard & Nelson Pass / 1992

READERS' REQUESTS FOR more power are reasonable, but not interesting enough to justify another article. Hanging some output transistors on the original and beefing up the power supply is best left as an exercise to the reader. While the A75 delivers more power, particularly into low-impedance loads, that is not the primary goal of this project. We wish to introduce more advanced concepts in amplifier design, including balanced inputs, dual differential inputs, true DC response, cascode and folded cascode operation, tiered and regulated supplies, operation with and without feedback, and details of designing with the new generation of power MOSFETS.… More...

Copyright © 2016 Pass Laboratories, Inc. All rights reserved

Telephone: 530.878.5350