Miscellaneous Projects

First off I would like to thank you and your crew for your generosity and commitment towards the diy community. Thanks to your efforts, and a little help from the guys over at diyaudio.com I have successfully built my very own A3 clone. The chassis is made of 3mm aluminum plates except for the front panel witch is 6mm. The sinks are rated at 0.3 C/W and the temperature stabilizes at a little over 55 degrees Celsius. The power supply consists of 2x18V 600VA toroid, and 22 x 4700uF capacitors. Rail voltage under load is +/-23.5V. DC offset is less than 30mV. As far as the sound goes, it is everything I hoped for and then some. Best regards, Sven Sødem