Most woofers just don’t quite do the lowest octave. You read the specs that say “usable response: 20 Hz – 20 KHz” and you know that the 20 Hz part of it is wildly optimistic. Achieving very low frequencies at reasonable power levels is not an easy job; the acoustic impedance experienced by a speaker cone declines as the inverse of the square of the frequency. As a practical matter, woofers and their enclosures need to be very large to properly reproduce the lowest octave. Even when you compensate with frequency equalization and more amplifier power, the performance suffers as… More...
After 22 years, it appears that quite a few DIY enthusiasts are still eyeing the A40 Class A amplifier design, but are discovering that not a single transistor from this design is still available. The following information is for those scouting out substitute parts: The Lambda output devices are no longer available, and they weren’t that common to begin with. Lambda appears to still be in business, but not in the business of power transistors. Common everyday complementary power darlington transistors will substitute for these. They need to be rated at 75 watts or higher, 5 amps for higher, and… More...
Copyright © 2016 Pass Laboratories, Inc. All rights reserved
Telephone: 530.878.5350